NETGEAR WN311B Network Driver

RangeMax NEXT PCI Wireless Adapter

WN311B Firmware Version 6.0 (supports Vista)

Installation Instruction

1. Download the file to a convenient location such as your desktop.

2. Shut down your computer.

3. Unplug your computer from the wall,Open your computer case. Ground yourself on an outside metal part of the computer, such as a flat surface on the back. Taking care only to touch the silver mounting bracket on the end, remove the adapter from your computer.Replace the computer case.

4. Plug the computer in.

5. Power up the computer and wait for it to reboot.

6. Select Start > All Programs. Then select the card, then Uninstall. Follow the on screen steps to remove the old version of the software.

7. Run Setup file from the folder where you saved the downloaded file.

8. Select the Country Domain, click Next

9. Click OK at the Country Domain Selection warning.

10. Click Yes to the License Agreement.

11. Click Finish

12. Completely power down your computer.Unplug your computer from the wall.Open your computer case.Ground yourself on an outside metal part of the computer, such as a flat surface on the back.Taking care only to touch the silver mounting bracket and the top of the adapter, place the adapter securely into your computer.Replace the computer case.

13. Power up the computer and wait for it to reboot.

14. Click Next to start the Found New Hardware Wizard.Click Finish when Found New Hardware Wizard is completed.

15. Complete the NETGEAR Touchless Wizard.