Model: WNR854T
Operating System: Not Applicable (Note: might work with other versions of this os.)
File: wnr854t_1_4_23_na_only.img
Comments:
RangeMax™ Next Wireless Router - Gigabit Edition
WNR854T RangeMax Next Router -
Firmware Version 1.4.23
Version 1.4.23 for North America Only
To Install
# Log in to the router using a Web broswer. The URL is http://192.168.1.1 ( if you did not change the router’s IP address ).
# Click Maintenance > Router Upgrade
# Click Browse and find the file you just downloaded.
# Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.
# After the router boots up, log in the router again.
You MUST Reset the router to default settings after upgrading the firmware
# Click Maintenance > Backup Settings
# Click Erase. The router reboots when the Erase operation is done.
# If you would like to check that the upgrade was successful, log in to the router again at http://192.168.1.1, and check the firmware version.
# Re-configure the router with the settings you saved in step 1. Optionally, You can use the Smart Wizard configuration assistant on the CD to reconfigure the router.