NETGEAR GS716T Network Driver

Company: NETGEAR
Model: GS716T
Operating System: Not Applicable (Note: might work with other versions of this os.)

File: gs716tv1_1_1_2_03.hex

Comments:

NETGEAR GS716T Driver. GS716T

ProSafe™ 16-Port Gigabit Managed Switch

GS716T Firmware Version 1.1.2_03

Installation Instructions

1. Download the new firmware to a convenient place on your local system (e.g., C:\downloads\).

2. Start Smartwizard Discovery utility, (included on the CD that came with your Smart Switch). If it is not installed, do so now, before continuing.

3. In Smartwizard Discovery window, click Discover to locate your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)

4. Highlight the Smart Switch to upgrade and click Firmware Upgrade.

5. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

6. You must reset the device to factory defaults after upgrading the firmware.

File Contents:

No file content information available at this time.

	21 Nov 2024